Дисциплина

HomeUndergraduate and post graduate educational programs Educational program Дисциплина

Engineering Design

Gurskaya Oxana Evgenyevna

Description: The issues of organization, planning and management of architectural and construction design, forms and methods of design activity are considered. Stages and phases of design, the basis for calculating the cost of design work of construction projects, regulatory and technical and other mandatory requirements are studied.

Amount of credits: 5

Пререквизиты:

Architectural Design IV

Course Workload:

Types of classes	hours
Lectures	15
Practical works	30
Laboratory works
SAWTG (Student Autonomous Work under Teacher Guidance)	30
SAW (Student autonomous work)	75
Form of final control	Exam
Final assessment method	Creative examination: calculation of a variant of the design solution according to the given conditions.

Component: Component by selection

Cycle: Base disciplines

Goal

The purpose of the discipline is to give the future specialists - architects theoretical knowledge and practical skills on the issues of organization, planning and management of architectural and construction design, forms and methods of design activities in the new socio-economic conditions.

Objective

- to form a professional understanding of the main issues related to the organization of the project business;
- learn the basics of calculating the cost of design works of construction projects;
- Ensure compliance of projects and technical documentation with standards, technical specifications and other regulatory documents;
- to form knowledge about the types and order of engineering surveys and the order of development of the project, its coordination and approval of design documentation, conducting designer's supervision.

Learning outcome: knowledge and understanding

- use reference, instructional and technical literature in accordance with the requirements for the projects;

Learning outcome: applying knowledge and understanding

- The following table shows the number of objects in the installation site of the device;
- develop projects in accordance with regulatory requirements;

Learning outcome: formation of judgments

- work in a group of allied professionals to develop projects, as well as defend the project and decisions made;

Learning outcome: communicative abilities

- adapt to work in a design organization and bodies representing interests in capital construction;
- interact with organizations representing the interests of the company in capital construction, taking into account the regulatory and technical and other mandatory requirements;

Learning outcome: learning skills or learning abilities

- to consolidate in the process of independent work obtained knowledge on the organization of the project case and to acquire practical skills;
- integrate a variety of forms of knowledge and skills in the development of design solutions.

Teaching methods

In conducting training sessions, the following educational technologies will be used: - theoretical material in a presentational presentation to form ideas about the types, levels of design; - Communicative technologies (discussion, academic debates) that promote the involvement of students in the search and management of knowledge, the acquisition of experience in solving a variety of tasks independently.

Assessment of the student's knowledge

Teacher oversees various tasks related to ongoing assessment and determines students' current performance twice during each academic period. Ratings 1 and 2 are formulated based on the outcomes of this ongoing assessment. The student's learning achievements are assessed using a 100-point scale, and the final grades P1 and P2 are calculated as the average of their ongoing performance evaluations. The teacher evaluates the student's work throughout the academic period in alignment with the assignment submission schedule for the discipline. The assessment system may incorporate a mix of written and oral, group and individual formats.

Period	Type of task	Total
1 rating	Practical work. Calculations of the cost of project works by topics.	0-100
	Oral report on the theoretical part of the discipline
	Rube testing
2 rating	Rube testing	0-100
	Practical work. Calculations of the cost of project works by topics.
	Practical work. Calculation of the cost of design works on an individual topic of diploma design
Total control	Exam	0-100

The evaluating policy of learning outcomes by work type

Type of task	90-100	70-89	50-69	0-49
Type of task	Excellent	Good	Satisfactory	Unsatisfactory
Practical work.	Practical hComplete knowledge and understanding of the entire scope of the studied material; calculations are made on the basis of analysis of the given design conditions, taking into account regulatory requirements and recommendations; the obtained final indicators correspond to the correct solution. Conclusions on the calculation are made.	Full knowledge and understanding of the entire volume of the studied material; calculations are made on the basis of the analysis of the given design conditions, taking into account the regulatory requirements and recommendations; there are minor errors and mistakes in the calculations, the final figures are corrected with a little help from the teacher.	of the given design conditions, taking into account	Practical hComplete knowledge and understanding of the entire scope of the studied material; calculations are made on the basis of analysis of the given design conditions, taking into account regulatory requirements and recommendations; the obtained final indicators correspond to the correct solution. Conclusions on the calculation are made.
Oral report on the theoretical part of the discipline	Demonstration of deep and complete knowledge and understanding of the entire scope of the studied material; full understanding of the essence of the concepts under consideration; ability to make a complete and correct answer based on the studied material; knowledge of regulatory rules and requirements; independently reasoned analysis, generalize conclusions.	Knowledge of all the studied program material; the material is presented in a certain logical sequence, but one minor error or no more than two deficiencies are allowed, and the student can correct them independently at the request or with a little help from the teacher; confirms the answer with specific examples.	The answer makes significant deviations from the topic; the analysis of the problem provided by the question is fragmentary, incomplete.	Demonstration of deep and complete knowledge and understanding of the entire scope of the studied material; full understanding of the essence of the concepts under consideration; ability to make a complete and correct answer based on the studied material; knowledge of regulatory rules and requirements; independently reasoned analysis, generalize conclusions.
Rube testing	90-100% correct answers	70-89% correct answers	50-69% correct answers	90-100% correct answers
Creative examination: calculation of a variant of the design solution according to the given conditions.	90-100% correctly solved problems	70-89% correctly solved problems	50-69% correctly solved problems	90-100% correctly solved problems

Evaluation form

The student's final grade in the course is calculated on a 100 point grading scale, it includes:

40% of the examination result;
60% of current control result.

The final grade is calculated by the formula:

FG = 0,6	MT₁+MT₂	+0,4E
	2

Where Midterm 1, Midterm 2are digital equivalents of the grades of Midterm 1 and 2;

E is a digital equivalent of the exam grade.

Final alphabetical grade and its equivalent in points:

The letter grading system for students' academic achievements, corresponding to the numerical equivalent on a four-point scale:

Alphabetical grade	Numerical value	Points (%)	Traditional grade
A	4.0	95-100	Excellent
A-	3.67	90-94	Excellent
B+	3.33	85-89	Good
B	3.0	80-84
B-	2.67	75-79
C+	2.33	70-74
C	2.0	65-69	Satisfactory
C-	1.67	60-64
D+	1.33	55-59
D	1.0	50-54
FX	0.5	25-49	Unsatisfactory
F	0	0-24	Unsatisfactory

Topics of lectures

The main directions of architectural and urban planning activities
State and interstate regulations in the field of architectural and urban planning
Architectural and Construction Control and Supervision
Objects and subjects of architectural and urban planning activities
Types of projects
Engineering surveys
Architectural Planning Assignment (APA) for the object (objects) of civil or industrial purpose
Terms of Reference for the performance of design work
Urban planning project
Duration of design, regulations, complicating factors of design, the actual timing
The main requirements for the design and working documentation
Coordination and approval of projects
Expertise of project documentation
State town-planning cadastre
International cooperation in the field of architecture and urban planning

Key reading

1. KAZGOR. Proekty.- Almaty: Izdatel'stvo «Basbaqan», 2019.- 368 s.
2. Zakon Respubliki Kazahstan ot 16 ijulja 2001 goda № 242. «Ob arhitekturnoj, gradostroitel'noj i stroitel'noj dejatel'nosti v Respublike Kazahstan» [Jelektronnyj resurs]. – Rezhim dostupa: https://adilet.zan.kz/rus/docs/Z010000242_
3. Proektnoe delo v stroitel'stve : [ucheb. posobie] / Ju. V. Anikin, N. S. Carev ; [nauch. red. V. I. Aksenov] ; M-vo obrazovanija i nauki Ros. Federacii, Ural. feder. un-t. — Ekaterinburg : Izd vo Ural. un-ta, 2015. — 124 s. [Jelektronnyj resurs]. – Rezhim dostupa: https://elar.urfu.ru/handle/10995/34798
4. Organizacija proektirovanija i stroitel'stva : uchebnik / A. I. Trushkevich. – 2-e izd., pererab. i dop. – Minsk : Vysh. shk., 2011. – 479 s. : il. ISBN 978-985-06-1980-8. [Jelektronnyj resurs]. – Rezhim dostupa: https://dwgformat.ru/book-review/organizaciya-proektirovaniya-i-stroitelstva-trushkevich-a-i/
5. SN RK 1.02-03-2011 Porjadok razrabotki, soglasovanija, utverzhdenija i sostav proektnoj dokumentacii na stroitel'stvo (s izmenenijami i dopolnenijami po sostojaniju na 04.03.2022 g.) [Jelektronnyj resurs]. – Rezhim dostupa: https://online.zakon.kz/Document/?doc_id=31222933
SP RK 1.02-105-2014 «Inzhenernye izyskanija dlja stroitel'stva. Osnovnye polozhenija» [Jelektronnyj resurs]. – Rezhim dostupa: https://www.egfntd.kz/rus/page/NTD_KDS_SPRK

June 12, 2023 - National mourning day in the Republic of Kazakhstan